FLUKE PM 6306A & PM 6304  RCL Meter

프로그램 할 수 있는 자동 RCL 메타
프로그램 할 수 있는 테스트 주파수 범위 : DC ~ 1MHz
0.1% 기본 측정 정확도 (주파수와 임피던스 독립)
DC 저항 측정 기능 : 선택사양
RS-232와 IEEE-488 인터페이스
AC와 DC 테스트 레벨(Test Levels) :50mV rms ~ 2V rms
10V까지의 내부 DC 바이어스(Bias)와 40V dc까지의 외부
바이어스(Bias)
메모리에서 9개의 전면부 설정 기능 ; 전원 끄기전의 마지막 
설정 불러오기(Recall)
실제적인 부품 테스트 전압/전류 Readback
오용오차(%) 화면표시 측정 : 편차 모드(Deviation Mode) 기능
연결 확인(Contact Check) 기능
 
 제품 사양
 AC Test Mode
Test frequency  PM 6306: 50, 60, 100, 120 Hz
 200 Hz to 100 kHz (100 Hz steps)
 100 kHz to 1 MHz (1 kHz steps)
  PM 6304: 50, 60, 100, 120 Hz
 200 Hz to 20 kHz (100 Hz steps)
 100 kHz
Test frequency accuracy  PM 6306: 0.01%
  PM 6304: 0.01%
Test signal levels  PM 6306: 50 mV to 2V (10 mV steps) via 100
  PM 6304: 50 mV via 100

 1V via 100

 2V via 400
Basic measurement accuracy at normal measurement mode  PM 6306: 0.1% ± 1 digit (for ³ 0.25V, £ 50 kHz)
 0.1% * (f/50 kHz) ± 1 digit (for ³ 0.25V, > 50 kHz)
 0.1% * (0.25V/Vt) ± 1 digit (for < 0.25V, £ 50 kHz)
  PM 6304: 0.05% ± 1 digit (for PM 6304C, £ 2 kHz)
 0.1% ± 1 digit (for £ 20 kHz)
 0.4% ± 1 digit (100 kHz)
 0.5% ± 1 digit (for 50 mV £ 20 kHz)
 2.0% ± 1 digit (for 50 mV, 100 kHz)
 DC bias
Internal  PM 6306: 0 to 10V (0.1V steps)
  PM 6304: 2V
External  PM 6306: 0 to 40V
  PM 6304: 0 to 40V
 DC test mode (Optional)
Test signal levels  PM 6306: 50 mV to 2V (10 mV steps) via 100
  PM 6304: 300 mV via 100

 1V via 100

 2V via 400
Basic measurement accuracy  PM 6306: 0.1% ± 1 digit (for ³ 0.25V)
  PM 6304: 0.1% ± 1 digit (for 1V)
 Constant check (PM 6306 only)
Pass  PM 6306: 33W
Fail  PM 6306: 33W (with indication of failed connection lead)
 Maximum measuring ranges
Impedance/Resistance AC Z or RAC  0.0000Ω to 200 MΩ
Resistance DC RDC  0.0000Ω to 50 MΩ
Capacitance C  0.00 pF to 31.8F
Inductance L  0.00 mH to 637 kH
Quality factor Q  0.000 to 1000
Dissipation factor D  0.000 to 1000
Phase Angle F  -179 to + 180 deg
Voltage monitor VX  0.1 mV to 2.00V
Current monitor IX  0.005 mA to 10.0 mA
 Maximum resolution
Impedance/Resistance AC Z or RAC  0.1 mΩ
Resistance DC RDC  0.1 mΩ
Capacitance C  0.01 pF
Inductance L  0.01 mH
Quality factor Q  0.001
Dissipation factor D  0.001
Phase angle F  0.1 deg
Voltage monitor VX  0.1 mV
Current monitor IX  0.001 mA
 Circuit diagram

Display

 1 of 7 different equivalent circuit diagrams
 Auto Mode

Read-out

 Dominant and secondary parameter

Equivalent circuit diagram

 Parallel for R+C, Serial for R+L
 Manual mode

Read-out

 Dominant and secondary parameter or Z, F, D, Q, VX, IX

Equivalent circuit diagram

 Parallel or serial selectable
 Average function
Function  Exponential averaging in continuous mode
Levels  PM 6306: 3 (and off)
  PM 6304: 1 (and off)
 Deviation mode (PM 6306 only)

Relative range in respect to reference value

 PM 6306: -100% to +100%
 Measuring modes (Normal)
Continuous  2 measurements/s
Single  Triggered via "TRIG" key
 Triggered via handler interface
 Triggered via IEEE-488 or RS-232
Test frequency  PM 6306: 50, 60, 100, 120 Hz
 200 Hz to 100 kHz (100 Hz steps)
 100 kHz to 1 MHz (1 kHz steps)
 DC (optional)
  PM 6304: 50, 60, 100, 120 Hz
 200 Hz to 20 kHz (100 Hz steps)
 100 kHz
 DC (optional)

Read-out

 Display or via IEEE-488 or RS-232 interface
 Measuring Modes (Fast)
Max. speed  10 measurements/s
Test frequency  PM 6306: 200 Hz to 100 kHz (200 Hz steps)
 100 kHz to 1 MHz (1 kHz steps)
 DC (optional)
  PM 6304: 200 Hz to 20 kHz (200 Hz steps)
 100 kHz
 DC (optional)
Single  Triggered via handler interface
 Triggered via IEEE-488 or RS-232
Read-out  Via IEEE or RS-232 interface (display blanked)
 Binning
Standard bins  9
Special bins  Bin "0" and bin "fail"
Bin programming via  IEEE-488 interface
 RS-232 interface
 Bin programmer (PM 6304 only)
Bin limit programming  Absolute or relative
 Trim function
Open circuit  Open circuit compensation Z > 100 k
Short circuit  Short circuit compensation Z < 10
 Protection against charged capacitors
C < 2 mF  PM 6306: Vmax < 200V
  PM 6304: Vmax < 500V
2 mF o C o 2 mF  PM 6306:
 Vmax < 47 x (C/mF) -0.234
 (Vmax in V, C in mF)
  PM 6304: Vmax. < 117 x (C/mF) -0.234
 (Vmax in V, C in mF)
 Stored settings (non-volatile memory)
Front panel settings  9 + 1 (trim figures included)
Bin settings  9 + 1
 Print measurements results

Print measurements results

 Via RS-232 interface for serial printers
 Calibration interval

Calibration interval

 1 year
 Environmental Conditions
Operating temperature  0° to 50° C
Storage temperature  -40° C to 70° C
Power requirements  100/120/220/240V + 10%
Line frequency  50/60 Hz
Power Consumption  PM 6306: 44 VA
  PM 6304: 31 VA
Safety  According to CE-regulation 73/23 EN61010-1 CAT II, Pollution Degree2
EMC  According to CE regulation 89/336:
 Emission according to EN 55011, Group 1 Class B, respectively  CISPR 11.
 Immunity according to EN 50082-1, inclusive IEC 801-2, -3, -4
Warm-up time  PM 6306: 30 minutes
  PM 6304: 5 minutes
 Dimensions and weight
W x H x D  315 x 105 x 405 mm (12.4 in x 4.13 in x 15.9 in)
Weight  PM 6306: 5.3 kg (11.7 lb)
  PM 6304: 4.7 kg (10.4 lb)

위로가기목록보기홈페이지                       (주) 성 광 정 밀 전 자
                       부산광역시 부산진구 전포1동 671-18
                       전화번호  : (051) 802-2220 팩스번호 : (051) 803-3330
                       http://www.skpnet.com