CURRNET  PROBE

 80i-400  AC Current Clamp
  • Measures ac current from 1A to 400A. Output to meter is 1mA/Amp ac. (1000 to 1 division ratio.) Maximum conductor
  •  size: one 1.18" (30 mm) or two each 0.98" (25 mm).
  • Accuracy: ¤(3%+0.4A) from 48 Hz to 440 Hz.

 80i-600  AC Current Clamp
  • Measures ac current from 1A to 600A. Output to meter is 1mA/Amp ac. (Division ratio is 1000 to 1.) Maximum conductor
  • size 2" (50 mm) in diameter. New straight, safety-shrouded plugs.
  • Accuracy: ¤2%, 50 Hz to 1 kHz, ¤3% (typical) 30 Hz to 50 Hz or 1 kHz to 10 kHz. (Factory Mutual Approved)

 90i-610S  AC/DC Current Probe
  • Measure AC or DC current, on scopes or DMMS, for a reasonable cost. Wide jaw fits over almost any size cable. BNC connector allows direct connection to Fluke Automotive ScopeMeters; a BNC to banana plug adapter (included) lets you use this probe with your DMM

 80i-110s AC/DC Current Clamp
  • The 80I-110s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter PM9081/001.

 80i-500s AC Current Clamp
  • Current Range: 1A to 500A AC rms
  • Basic Accuracy 45Hz to 65Hz: ± (5% of reading + 0.3A)
  • Output Signal: 1 mV AC per 1A AC, 1000:1 division ratio
  • Bandwidth: 5 Hz to 10 kHz
  • Working Voltage: 600V AC rms
  • Maximum Conductor Size: 30mm (1.18 inch) diameter
  • Safety Rating: 600V rms. CAT III per IEC 1010-02-032

 i200  AC Current Clamp
  • Measuring range: 0.5 to 240A
  • The output signal is 1 mA/A
  • Safety shrouded banana plugs for use with DMMs or any other current measuring device which has banana inputs
  • Maximum current 240A ac
  • 40 Hz to 10 kHz frequency response
  • EN61010, CAT III 600V
  • One year warranty

 i200s AC Current Clamp
  • Measuring range: 0.1 to 24A and 0.5 to 240A
  • The output signal is 100 mV/A in the 20A range and 10 mV/A in the 200A range
  • Includes BNC connector making it suitable for use with any oscilloscope, power analyzer or ScopeMeter" test tool having a compatible BNC input connector
  • Dual banana to BNC adapter is included for use with DMMs
    40 Hz to 10 kHz frequency response
  • Maximum conductor size 20 mm dia. or busbar 20 x 5 mm

 i-410  Clamp-on AC/DC Current Prob
  • 배터리로 작동하는 Hall-effect clamp-on 프로브는 5A 에서 400A 의 AC 또는 DC 전류를 측정. 최대 도체 크기 : 1.18"(30mm) 한 개 또는0.98"(25mm) 두개. 출력은 AMP AC 또는 DC 당 1mV. 
    정확도 : ±(5%+2.5A), 5A 에서 400A, DC 에서 62Hz. 400Hz까지
    사용가능.

 i-1010  Clamp-on AC/DC Current Probe
  • 배터리로 작동하는 Hall-effect clamp-on 프로브는 600A 까지의 
    AC, 1000A 까지의 DC 전류를 측정. 출력은 amp DC 또는
    AC당 1mV.
  • 최대 도체 크기 : 1.18"(30mm) 한 개 또는 0.98"(25mm) 두개
  • 정확도 : ±(2%+1A), 1A 에서 100A, dc 에서 62Hz. 440Hz까지
    사용 가능.

 

 i1000s Current Clamp
  • Current Range: 100mA to 1000 Arms
  • Basic Accuracy 48Hz to 65Hz:
    10A Range +/- 3% of reading + 0.1A, 100mV/A output
    100A Range +/- 2% of reading + 0.5A, 10mV/A output
    1000A Range +/- 1% of reading + 1A, 1mV/A output
  • Bandwidth: 5Hz to 100kHz
    Working Voltage: 600V AC rms
  • Maximum Conductor Size: 54 mm (2.13 inch) diameter
  • Safety Rating: 600V rms. CAT III per IEC 1010-02-032

 i2000  Flexible 2000A AC Current Probe
  • Measures up to 2000A ac
  • Switchable between 200A and 2000A
  • Includes a 62 cm (24.4") circumference flexible probe with a connector for coupling and decoupling around a conductor
    Includes BNC connector, making it suitable for use with
    The output signal is 10 mV/A in the 200A range and 1 mV/A in the 2000A range
  • Bandwidth (-3dB): 1 Hz to 20 kHz

 I-3000  Clamp-On AC Current Clamp
  • Measures ac current from 1A to 2400A RMS continuous.
  • Accuracy 1-30A - 2% of reading + 0.1A, 1-300A - 2% of reading + 0.5A, 1-3000A - 2% of reading + 2A. PM9081/001 BNC to banana adapter included.

위로가기목록보기홈페이지                       (주) 성 광 정 밀 전 자
                       부산광역시 부산진구 전포1동 671-18
                       전화번호  : (051) 802-2220 팩스번호 : (051) 803-3330
                       http://www.skpnet.com